Rubetek Knowledge Base



Wi-Fi RGB bulb


The Wi-Fi RGB bulb changes the way you think about lighting in your home: control warm and cool shades of color, change the brightness, set any color, and set indoor backlighting modes with one touch - or even your voice!

Just connect the RGB bulb to mobile application rubetek and get full control of mood in your home. Want to give your eyes a rest after a hard day's work - soft warm lighting will help you relax. Want to get in the mood for work, a cool bright light will help you concentrate. Over 16 million color shades and ultra-fine settings in an elegant designer case help you transform your interior according your mood and taste. And the RGB bulb's interaction with other Smart Home devices offer opportunities to play programmed scenarios, such as "simulating the presence of the Owner". And all this at minimal cost, because the rubetek Wi-Fi RGB bulb consumes 5 times less electricity than a conventional incandescent RGB bulb.

Principle of operation

After connecting the Smart RGB bulb to the 220 V mains and adding the device to the rubetek app, you will be able to control the color, brightness, and on/off light settings on a timer or scenario.


Control the RGB bulb with the mobile app
Set and save colors by preference and choose from 16 million options
Use in normal RGB bulb mode with fine color temperature set up
Create scenarios: switching the RGB bulb on and off depending on time and conditions
Use voice control for the RGB bulb on Android-based smart phones
Add the RGB bulb to HomeKit on iPhone (HomeKit password is specified in settings)

Mobile app

Download and install rubetek application from App Store or Google Play. You can use QR-code.
Create an account and confirm your mobile number to use the application.

Adding to application

  1. Open rubetek application.
  2. Press “+” in top right angle of the main screen
  3. Select “Add Device”

  1. Select section Lighting → RGB bulbs→ Wi-Fi RGB bulb

  1. Switch on/off the RGB bulb three times to put the Smart RGB bulb in add mode When activated successfully, the RGB bulb will flash blue

If the Wi-Fi password is incorrect, the RGB bulb will flash yellow


To turn the RGB bulb on/off, a single press on the tile of the device is sufficient.

Wi-Fi RGB bulb
RGB bulb is Off

Wi-Fi RGB bulb
RGB bulb is On

Wi-Fi RGB bulb
Not available
RGB bulb is not available

Control Screen

Press and hold (3 sec) the tile to get to control screen of the RGB bulb

  • 1
    Selection of palette
  • 1
  • 1
    Brightness setting
  • 1
    Palette of selected colors
  • 1
    RGB bulb On/Off
  • 1
    Adding new color in access panel
  • 1
    Scenarios selection
  • 1
    Setting of work by timer/schedule
  • 1
    RGB bulb settings

  • Settings

    Go to control shade to get to device settings.

  • 1
    Device name
  • 1
    Location room
  • 1
    Set Auto Off
  • 1
  • 1
    Provide access to other user
  • 1
    Hide/display the device on the main screen
  • 1
    Add to/remove from Favorites
  • 1
    Password to add in application Home
  • 1
    Device tripping history
  • 1
    Advanced device data
  • 1
    Remove the device from Home application

  • With a one scale division signal, we do not guarantee stable operation of the security system. Move the device to improve signal quality.

    It is possible Wi-Fi network only within local network, i.e. Your mobile phone shall be connected to current Wi-Fi network to which the device is connected


    RGB bulb supports up to 10 timers for switching on and 10 timers for switching off. The will be in operation regardless of the availability of the Internet. Got to control shade and press its tile on the main control screen to set timers.

    SMS notifications

    Go to the SMS-informing section in the Home settings to assign the phone number. You can add several phone numbers to one Home. Limits: up to 20 SMS per day to one mobile phone but max. 20 SMS to all assigned numbers in a Home.

    Push notifications

    To use this function you should permit rubetek application to send push notifications. You can do it in your mobile phone settings.


    How do I set the schedule of the RGB bulb?
    Set timer parameters in mobile app. Timer allows setting the action that will be executed according to schedule. You can set 10 timers for switching on and 10 timers for switching off.
    Is it possible to control the RGB bulb when there is no internet?
    If you have previously set up timers for the RGB bulb in the app, they will be triggered regardless of Internet availability. Also it is possible to control the RGB bulb in local network, but not remotely.
    Can the RGB bulb be installed outdoors?
    No. RGB bulb is designed for indoor installation
    Can I install the device myself without asking for help from a specialist?
    Yes, you can. Installation does not require special qualification.

    If you can't solve the problem yourself, contact technical support at or by phone at 8 800 777-53-73.


    Model RL-3103/RL-3104/RL-3105
    Type of the RGB bulb LED
    Power configuration Wi-Fi
    Wireless Wi-Fi network 802.11 b/g/n
    Support of networks 5 GHz not available
    The operating voltage 220 – 240 V
    Power 7W/5W/5W
    Bulb base Е27/Е14/GU10
    Radiated colors RGB spectrum and white
    Dimming available
    Light flux 540-600 Lm/400-460 Lm/460 Lm
    Life time 25000 hours
    Light angle 220 °/270 °/180 °
    Overall dimensions 69×69×118 mm/43×43×115 mm/49×49×58 mm
    Weight 120 g/71 g/55 g

    Content of delivery

    Wi-Fi RGB bulb RL-3103/RL-3104/RL-3105 1 pc
    Warranty card 1 pc
    Manual 1 pc


    Certificate of Compliance RU C-CN.HA83.B.01119/21
    Validity 17.11.2021-16.11.2024
    Certification body ООО «Инновационные решения»
    Complies with the requirements ТР ТС 020/2011 «Электромагнитная совместимость технических средств» ТР ТС 004/2011 «О безопасности низковольтного оборудования»