Help
- Security
- Leak protection system
- Video
- Climate
- Control
- Power
- Lighting
LED tape
LED tape changes the way you think about lighting in your home: control warm and cool shades of color, change the brightness, set any color, and set indoor backlighting modes with one touch - or even your voice!
Just connect the tape to mobile application rubetek and get full control of mood in your home. Want to give your eyes a rest after a hard day's work - soft warm lighting will help you relax. Want to get in the mood for work, a cool bright light will help you concentrate. Over 16 million color shades and ultra-fine settings in an elegant designer case help you transform your interior according your mood and taste. And the tape’s interaction with other smart home devices offer opportunities to play programmed scenarios, such as "simulating the presence of the Owner".
And all this at minimal cost, because the rubetek Wi-Fi tape consumes 5 times less electricity than a conventional incandescent lamp.
Principle of operation
LED tape is equipped with smart control unit with button to be added to rubetek application or to switch on/off tape lighting. After connecting the smart tape to the 12 V power block and adding the device to the rubetek app, you will be able to control the color, brightness and on/off light settings on a timer or scenario.
Features
Structure diagram
Mobile app
Download and install rubetek application from App Store or Google Play. You can use QR-code.
Create an account and confirm your mobile number to use the application.
Adding to application
- Open rubetek application.
- Press “+” in top right angle of the main screen
- Select “Add Device”
- Select section Lighting → Lamps → LED tape RL-3112
- Put LED tape to adding mode. To do it press and hold power button on Wi-Fi controller for more than 6 sec and follow tips on a screen.
Interface
To turn the tape on/off, a single press on the tile of the device is sufficient.
Control Screen
Press and hold (3 sec) the tile to get to control screen of LED tape.
Settings
Press and hold the tile on the screen to open button settings of LED tape.
Timers
Control unit supports up to 10 timers for switching on and 10 timers for switching off. The will be in operation regardless of the availability of the Internet. Go to control shade and press its tile on the main control screen to set timers.
SMS notifications
Go to the SMS-informing section in the Home settings to bind the phone number. You can add several phone numbers to one Home.
Limits: up to 20 SMS per day to one mobile phone but max. 20 SMS to all assigned numbers in a Home.
Push notifications
To use this function you should permit rubetek application to send push notifications. You can do it in your mobile phone settings.
FAQ
