Rubetek Knowledge Base
Motion sensor

Motion sensor



This is a compact, battery-powered wireless device. The Sensor looks for changes in infrared radiation caused by human movement or any activity indoors. When movement is detected, you will receive a notification to your smartphone.
The Sensor can also be used to create collaboration scripts with other devices. For example, to automatically turn off the lighting when there is no movement in the room.
The device is equipped with a tamper - you will receive a notification in case it is opened or torn off the surface.

A Wi-Fi device supporting Rubetek RF 868 MHz sensors is required to add the Sensor to the mobile app, receive notifications and create scripts.
  • Battery life up to 3 years
  • Received signal strength indicator in the app
  • Operability confirmation every 30 min
  • Push-notifications when the battery charge level is low or the Sensor is triggered
  • Tamper detection
Connection type RF 868 MHz
Radio signal range up to 200 m outdoors
Sensitive element PIR sensor
Horizontal detection angle 110º
Vertical detection angle 90º
Motion detection range up to 12 m
Operating voltage 3 V
Battery CR2450
Battery life up to 3 years
Operability confirmation interval 30 min
Battery level data yes
RSSI (Received signal strength indicator) yes
FOTA (Firmware Over-the-Air) yes
Operating temperature 0°C…+40°C
Operating humidity до 80% non-condensing
Tamper detection yes
Installation interior only
Case material plastic
Dimensions 45×45×29 mm
Weight 22 g