Rubetek Knowledge Base
Motorized ball valve

Motorized ball valve

RMS-3209

Info

This is a wireless device that can work both from batteries and from the electrical mains.
The electric drive is a part of Leakage protection system. It allows you to control your home water supply remotely, using Rubetek mobile application, and automatically shut off the water in case of an emergency.
The device is available in two configurations, which differ by the diameter of the ball valve: RLP-3811 (½") or RLP-3812 (¾").
Automatic water shut-off is engaged based on the status of RS-3225 Water Leak Sensor. It can be configured both in the mobile application or without it - in this case, interaction of the Sensor and Drive will be arranged via radio signals. With this method of device connection, you will not be able to receive leak notifications or monitor system status in the application.
The Motorized Ball Valve has a self-cleaning function, preventing the formation of plaque or erosion.

A Wi-Fi device supporting Rubetek RF 868 MHz sensors is required to add the Device to the mobile app, receive notifications and create scripts.
  • Battery life up to 3 years
  • Received signal strength indicator in the app
  • Operability confirmation every 30 min
  • Push-notifications when the batteries charge level is low or Ball Valve position changed
Connection type RF 868 MHz
Radio signal range up to 200 m outdoors
Power supply DC 5 V, 1 A
Battery 4×AA
Battery life up to 3 years
Operability confirmation interval 30 min
Battery level data yes
RSSI (Received signal strength indicator) yes
FOTA (Firmware Over-the-Air) yes
Time to change position to 90° ~22 s
Operating temperature 0°C…+60°C
Operating humidity до 80% non-condensing
Installation interior only
Case material plastic
Dimensions 135×95×82 mm
Weight 549 g

Downloads

Top