Rubetek Knowledge Base
Door/window sensor

Door/window sensor



This is a compact, battery-powered wireless radio device. The sensor is an additional component of security system that will help protect your home from unauthorized intrusion. It consists of two parts - a sensor with a reed switch and a magnet. If the reed switch is in the magnetic field range, the Sensor is closed. Opening is detected when the two components of the device are disconnected. In this case, a notification will be sent to your smartphone.
Place it on doors, window sashes, cabinet or wardrobe drawers to always know what's going on at home.
The Sensor can be used to create collaboration scripts with other devices. For example, to automatically turn off the air conditioner when opening a window in the room.
The device is equipped with a tamper - you will receive a notification in case it is opened or torn off the surface.

A Wi-Fi device supporting Rubetek RF 868 MHz sensors is required to add the device to the mobile app, receive notifications and create scripts.
Доступные цвета White
Доступные цвета Anthracite
Доступные цвета Wenge
  • Battery life up to 3 years
  • Received signal strength indicator in the app
  • Operability confirmation every 30 min
  • Push-notifications when the battery charge level is low or the Sensor is triggered
  • Tamper detection
Connection type RF 868 MHz
Radio signal range up to 200 m outdoors
Operating voltage 3 V
Battery CR1632
Battery life up to 3 years
Operability confirmation interval 30 min
Battery level data yes
RSSI (Received signal strength indicator) yes
FOTA (Firmware Over-the-Air) yes
Operating temperature 0°C…+40°C
Operating humidity до 80% non-condensing
Tamper detection yes
Installation interior only
Case material plastic
Dimensions 22×45×11/11×26×9 mm
Weight 9/5 g