Rubetek Knowledge Base
Control module

Control module



This is a Wi-Fi device designed for remote control of climatic electrical appliances. The module allows to adjust the temperature and operating mode of the connected device. It shall be plugged into the USB connector on the housing of the climatic electrical appliance. You need to familiarize yourself with the list of supported devices before purchasing.
With the help of the Module, you can create collaboration scripts with other devices. For example, configure automatic shutdown of the air conditioner when the window is opened, which is detected using the Door/window Sensor RS-3215.
The device can be used to add external 868 MHz RF wireless sensors to Rubetek mobile app.
  • Programmable timers
  • RF 868 MHz hub
  • Helps to create scripts for Smart home devices
  • Voice control
Connection type Wi-Fi
Wi-Fi frequency range 2.4 GHz
Wireless communication standards IEEE 802.11b/g/n
Support 5 GHz Wi-Fi networks no
Connection interface USB Type-A
RSSI (Received signal strength indicator) yes
Power supply 5 V, 1 A
Support 433 MHz sensors no
Support 868 MHz sensors yes
Encryption XTEA
FOTA (Firmware Over-the-Air) yes
Timers 10 to turn on, 10 to turn off
Operating temperature 0°C…+40°C
Operating humidity up to 80% non-condensing
Installation interior only
Mobile App iOS (version 15.0 or higher)
Android (version 7.0 or higher)
Case material plastic
Dimensions 48×18×7.5 mm
Weight 8 g