Rubetek Knowledge Base
Wi-Fi single switch relay with dry contact

Wi-Fi single switch relay with dry contact



This is a compact Wi-Fi device designed for remote control of automatic gates, barriers, roller shutters and other electrical appliances with a capacity of up to 3 kW.
The use of dry contact makes the Relay a universal control element for a wide range of equipment. Connect your garage doors, and monitor their operation and current position from Rubetek mobile app. You will no longer have to remember whether you closed them before leaving.
The built-in energy consumption measurement function allows to view statistics and electricity costs for various periods.
You can use the Relay to create collaboration scripts with other devices. For example, set up automatic switch-on of the light in the garage when its doors are opened.
The device can be used to add external 868 MHz RF wireless sensors to Rubetek mobile app.
  • Consumption monitoring
  • Programmable timers
  • RF 868 MHz hub
  • Helps to create scripts for Smart home devices
  • Voice control
  • Voltage and current protection
Connection type Wi-Fi
Wi-Fi frequency range 2.4 GHz
Wireless communication standards IEEE 802.11b/g/n
Support 5 GHz Wi-Fi networks no
RSSI (Received signal strength indicator) yes
Channels 1
Operating voltage (AC) 100-240 V, 50/60 Hz
Operating voltage (DC) 24-60 V
Maximum load current (AC) 13 A (cosᵠ = 1)
6.5 A (cosᵠ ≠ 1)
Maximum load current (DC) 10 A
Power consumption < 2 W
Power output up to 3 kW
Support 433 MHz sensors no
Support 868 MHz sensors yes
Power consumption monitoring yes
Dry contact yes
Encryption XTEA
FOTA (Firmware Over-the-Air) yes
Timers 10 to turn on, 10 to turn off
Voltage protection yes
Current protection yes
State recovery after power outage yes
Operating temperature 0°C…+40°C
Operating humidity up to 80% non-condensing
Installation interior only
Mobile App iOS (version 15.0 or higher)
Android (version 7.0 or higher)
Case material plastic
Dimensions 42.5×36×17 mm
Weight 31 g