Rubetek Knowledge Base
Addressable Optical Smoke Detector

Addressable Optical Smoke Detector

SD-1

Info

The device is designed for early detection of fire outbreaks accompanied by the appearance of low-concentration smoke inside a controlled space in enclosed spaces of various buildings and structures, and transmission of "Fire" signal, as well as signals about its technical condition to the controllers of RUBETEK fire alarm system. It is used with CP-1 receiving and control device (Control Panel) and SC-1 controller.
Доступные цвета
Доступные цвета
  • Early detection of fire
  • Generation of "Fire" and "Fault" signals
  • Automatic detection of the device in the system
  • Detector testing using a laser tester or from the controller menu
  • Performance monitoring
  • Dust control
  • Monitoring of the current smoke concentration value
  • Light indication of status
  • Measurement of PLC voltage at the installation site
  • Switching to service mode without interference with pairing and settings
  • Convenient mounting on the base
  • Protective cover
  • Modern design
Connection type PLC
Number of occupied address slots 1
Power supply, V via PLC
Current consumption, μA - max 0,17 in Standby mode
- max 0,18 in «Fire» mode
Sensitivity, dB/m from 0,05 to 0,2 dB/m
Operating temperature, °C from - 25 to + 55
Operating relative humidity, non-condensing up to 93% at +40°C
Case protection rating IP20
Dimensions, mm Ø 92 x 42
Weight, g, not more than 84
Average service life, years 10
Average time to failure, h 60000