Wireless Addressable Sounder with flasher
ASFW-1Info
Description:
The device is designed for light and sound warning of people about a fire. It has seven sound alert modes and an option to introduce a programmable activation delay and a programmable response time limit. The sounder is used with a CP-1 receiving and control device (Control Panel). Communication with system devices is carried out via RF 868 MHz wireless protocol.
Main features:
- Sound and light notification
- Seven sound patterns
- At least 85 dB volume
- Battery status monitoring
- Tampering device against opening of the case
- Tampering device against separation from installation site
- Switching to service mode without interference with pairing and settings
- Modern design
Specifications:
| Connection type | RF 868 MHz |
| Number of address slots occupied | 1 |
| Power supply, V | 3 V, CR123A 1500 mAh battery, 2 pcs |
| Battery life, years | at least 3 |
| The range of reproducible frequencies, Hz | from 900 to 3200 |
| Type | A |
| Alarm sound level at 3m, dB | at least 85 |
| Sound mode | 7 |
| Tamper | yes |
| Maximum communication range (in open terrain), m | 900 |
| Number of channels within the frequency range, pcs | 5 |
| Radiation power, MW, not more than | 25 |
| Operating temperature, °C | from -25 to +55 |
| Operating relative humidity, non-condensing | up to 93% at +40°C |
| Case protection rating | IP21C |
| Dimensions, mm | 85 x 85 x 40 |
| Weight, g, max | 125 |
| Average service life, years | 10 |
| Average time to failure, h | 60000 |
